Register for a free trial

Maritime Digitalisation & Communications

Self-docking vessels 'sail' one step closer to berthing

Wed 28 Nov 2018 by Craig Jallal, tankers and markets editor

Self-docking vessels 'sail' one step closer to berthing
Just press 'sail' for automated docking using Wärtsilä technology (pictured Folgefonn ferry)

Under the watchful eyes of the Norwegian Maritime Authority, the ferry Folgefonn made three port calls and automatically docked at its final destination. This is believed to be the first time a vessel has completed a fully automated dock-to-dock operation, in complete hands-off mode, for a vessel of this size.

Once the operator selected the next destination berth, the operation was started by simply selecting 'sail', which authorises the autonomous controller to take control of the vessel. The ferry left the dock, manoeuvred out of the harbour, sailed to the next port of call, manoeuvred through the harbour entrance, and docked alongside the terminal – all without human intervention.

The vessel's navigation was controlled via a series of tracks and waypoints, which guided the ship to the next destination. The autonomous controller, based on Wärtsilä’s existing dynamic positioning system, controlled the vessel’s speed, position on the predefined track, and heading.

 GNSS is used as the primary sensor, while a Wärtsilä Guidance Marine CyScan AS is being tested as a secondary position sensor for the approach to the berth.

“This represents a huge step forward in validating automated shipping solutions, and an important progression within our smart marine programme. This emphasises once again Wärtsilä’s recognised position as the global technology leader in marine innovations. We continue to lead the way in developing the ‘intelligent’ products and systems needed to move the marine industry towards a new era of super-high efficiency, safety and environmental sustainability,” said Wärtsilä vice president Voyage Solutions Joonas Makkonen.

85-m long Folgefonn is owned by Norwegian ferry operator Norled. It was also used for the initial testing of Wärtsilä's autodocking solution, which took place in early 2018.

The vessel is equipped with hybrid propulsion with wireless shore connection capable of fully electric operation, and features numerous other Wärtsilä innovations, including its wireless inductive battery charging solution and energy storage systems.

“We are pleased to co-operate with Wärtsilä in this exciting project. A fully autonomous dock-to-dock solution will provide us with considerable value-adding benefits in terms of better efficiency, greater safety, lower fuel consumption and, therefore, reduced exhaust emissions. We see the Wärtsilä solution as being a key support to the crew, enabling them to operate the vessel as effectively as possible,” added Norled technical manager Sigbjørn Myrvang.

The procedure was overseen by the Norwegian Maritime Authority, whose project manager Nils Haktor Bua said “We were on site for three days as witnesses to these tests; the first full-scale demonstration towards an autonomous operation of a vessel that we have seen. It was, to say the least, very impressive. There is no doubt that such technology can eventually increase the safety and overall efficiency of the docking and undocking operations for ships. Of course, further development work is still ongoing, but I am impressed by how stable the system already is at this stage.”

Recent whitepapers

Related articles





Knowledge bank

View all